50g

I have made my first pass through the debug program. I have not got a
good understanding how to work it yet but I will keep hacking at it.

thanks
Gordon

--- In 50g@yahoogroups.com, "Gordon Ayres" <gordon.ayres@...> wrote:
>
>
> thanks awsome information.
>
> Best regards
> Gordon
>
>
> --- In 50g@yahoogroups.com, "Scott" <blueelectron@> wrote:
> >
> > --- In 50g@yahoogroups.com, "Gordon Ayres" <gordon.ayres@> wrote:
> > >
> > > I am a new user on the 50g. Old user other models before the 49+
> > > series of calculators.
> > >
> > > Using the link kit the instructions seem terse and I am entering a
> > > trial and error mode of experimentation to make things work. Old hp
> > 41
> > > and hp71 series had seamless ways of saving programs to tape once
> > > written but do not have the ability to write on pc and transfer to
> > > calculator. However, the manuals and capabilities where clearly
> > given
> > > through examples of everything you needed to archive and restore
> > from
> > > tape. I know that this calculator has the capability to make
> > transfers
> > > form pc text to the calculator and I will eventually get there.
> > >
> > > Here is a company that seems to have this under control and sales a
> > CD
> > > that will install its programs on the calculator from the CD using
> > the
> > > link kit. So I know that the capability must be within my grasp.
> > >
> > > http://www.southforktech.com/sfttools.htm
> > >
> > > Is there a good explanation of how to write programs on your PC and
> > > how to transfer them efficiently to the calculator?
> > >
> > > I have transferred a text file to the stack on the calculator then
> > > edited it on the calculator replacing the double left and right
> > > programming enunciators with HP enunciators but this is a tedious
> > > process and seems I might as well write the programs on the
> > calculator
> > > in the first place.
> > >
> > > Any ideas or help would be appreciated.
> > >
> > > Best regards
> > > Gordon Ayres
> > >
> >
> > I love using Debug4x from http://www.debug4x.com. It's a free IDE
> > that comes with an emulator (also available separately from
> > http://www.hpcalc.org) that you can test your programs on before
> > transferring to your physical device. Debug4x now includes User RPL
> > programming (was mainly used to create SysRPL libraries and assembler
> > code before the inclusion of User RPL--the "native" HP programming
> > structure).
> >
> > Manjo (the author of the grayscale program OpenFire) has also created
> > a programming environment that's available here:
> > http://fly.srk.fer.hr/~manjo/openfire/
> >
> > For detailed programming references, check out the HP49G+ Adanved
> > User's Guide, available at:
> > http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00554621/c005
> > 54621.pdf
> >
> > Also, the SysRPL programming guide is here:
> > http://www.hpcalc.org/details.php?id=5142
> >
> > Enjoy,
> > Scott
> >
>