Archive of the former Yahoo!Groups mailing list: MOTM
Subject: Setting VCA 0 point
From: "Paul Schreiber" <synth1@...
Date: 1999-07-11
Since this came up twice recently:
1) Turn BIAS all way CCW
2) Remove knob
3) Turn shaft of pot until audio barely audible. Back it down
ever-so-slightly
4) Re-attach knob. Tighten knob so pointer line is at 0.
Note: this may "skew" the knob CW or CCW (ie all the way CW not to 1.2 tick)
That's OK!
Paul S.