Nathan,
If you're concerned about the expense and have no looming need to pull up
vinyl flooring, Radio Shack carries a cheapo heat gun that's basically a
modified cigarette lighter in a fancy case with an additional heating
element. You can refill the lighter cartridge with butane. It works
wonderfully. Just make sure you're not too close to the insulation of the
wires! :)
I love the really big heat guns, though, for stripping paint off old
woodwork! There's no feeling quite like finding beautiful molding under 60
years of gooped-on paint.
David.
> -----Original Message-----
> From: nathan durham [mailto:nate@...]
> Sent: Saturday, January 13, 2001 1:55 PM
> To: MOTM
> Subject: [motm] first module
>
>
> I just received and built my first MOTM module, the 110
> VCA/RM. Building
> went without a hitch (aside from my kids getting away with a
> couple of
> resistors when I wasn't looking), and it seems to work fine so far.
>
> Is there any reason not to use an ordinary hair dryer if a
> proper heat
> gun isn't available?
>
> Thanks Paul,
> nathan durham
>
>
>