Archive of the former Yahoo!Groups mailing list: MOTM
Subject: I found it - I found it
From: "J. Larry Hendry" <jlarryh@...>
Date: 2000-12-25
Some of you have been looking for metal edges that are an exact fit to slip
over the edge of your MOTM modules for that "Moog edge" look. Well, I have
found something that suits that need. See the attached photos. These are a
perfect slip fit over the standard MOTM panel and are just tight enough not
to scratch the paint. My only reservation is that the thickness of the
brass metal (need to paint white), times two will be too thick to fit
between the allowed gap Paul has provided. I have come to the conclusion
that any metal thin enough to meet that need would just be too thin to be
worth having for this function. So, if you select this option, you will
need to take that into consideration.
If you are interested in getting some of this for your own experiments:
Micro-mark 1-800-225-1066
or www.micromark.com
Part # 60254 - 8 pieces to a pack for $7.60
Size = 1/8" walls - 5/32" inside space - 0.14" metal thickness - 12" long