You really shouldn't use the MTA connectors to gang multiple boards,
try running a second set of wires from the power supply to the faston
connectors on the power distribution board. This only gives you 24
connections, but it will keep you from running too much current through
the first board and/or wires. -Nate
--- In motm@egroups.com, "Tkacs, Ken" <ken.tkacs@j...> wrote:
>
> You could always get Paul's super-long cable and cut it in half to get two
> single-ended power cables. Just a thought.
>
> I thought there ∗was∗ an enlarged power distribution board in the works...?
> The current one has 11 connectors after power supply connection, which is
> far too little for us cabinet guys. You can gang multiple boards, but you
> lose one or two connectors on each every time you do this.
>
>
> -----Original Message-----
> From: Tony Allgood [mailto:oakley@t...]
> Sent:Wednesday, 06 December, 2000 3:20 PM
> To:motm@egroups.com
> Subject:Re: [motm] MOTM Power Cables
>
> ...Its a bit sad to chop off one end of the MOTM cable...