> Question--do you find the 10" depth "stable"? I was going to take advantage
> of the shallow depth of the MOTM modules and keep depth to an absolute
> minimum (maybe 8" outside measurement), but I worry that I will plug a patch
> cord in and push the whole thing over. Is this a silly worry? Even with
> rubber feet? That's an open question to any of you cabinet guys / Moog
> owners.
>
I was wrong. The depth is really 8.5". It is pretty stable. I'll admit that the
depth was dictated by the other cabinets in my system so there wasn't any science
involved. It did create a nice depth for mounting the power supply in the back with
a good bit of room between the PS and the modules. What certainly helps is having a
lower cabinet that is deeper and sloped. The bottom cabinet is 14". The rubber
feet are very important when stacking. I've had the whole stack shake when I get
'a-patchin'. It sits on a fairly heavy duty table that does have some play with all
the weight. I've never had any of the cabinets slide around.
Eric
__________________________________________________
Do You Yahoo!?
Yahoo! Messenger - Talk while you surf! It's FREE.
http://im.yahoo.com/