--- In
motm@egroups.com, weld@b...
wrote:
> My CV-5 is here finally, boy....what a nice box for the money!
> Highly recommended
> Jim
I've had a JKJ CV-5 since May, have only
used the cv and gate outputs so far. Kyle
said I should also be able to use the
sliders on my Alesis QS7 to output at the
C16/C17 jacks, assuming I can figure out
how to set the sliders to cc16/17! It's
buried in the menus somewhere, and I
haven't had the time or patience to try it.
If it works, that would make a nice
"remote control" for things like '320 rate/
shape, tuning/detuning the '300s during
performance, ect. When I first got the
CV-5, I slapped a Micronta DVM (Paul's
fave) on the CV out and saw a 2mv drift
during the first 5 minutes, after that it
was steady as a rock. I plan to install
mine inside my box o' MOTM and make a
breakout panel for it.
If you or I come up with any ideas/
questions, we should probably take it off-
list, but feel free to write me.
Chuck