hello all
> Don't stick the output of the LFO into a '820 CV input would work.
> But, you just need DC offset to avoid negative voltages. I think the
> SAW out, with SHAPE around mid-range, will work. Check it on a 'scope.
> This will make a 0-5V triangle.
a gasp escapes from somewhere near the back of my mind...
so the CV inputs should be triggered by EGs only then
it's just that i immediately thought it would be cool to stick a load of
LFOs into everything (my stock response to any box that has a "CV IN"
> > or is there something already in there to stop this..?
> Nope.
i couldn't do something with a diode over the control inputs could i...?
(ducking)
> If the GATE does go to near ground (say, below 0.050V) then it should
> BYPASS. I will test this out today and add a blurb to the manual. THe
> pullup resistor is 2K7 to to +15V. So, you need to NOT hook it up to say
TTL
> outputs :) Moog S-Trig with pullup to +15V (an option of Kenton Pro-2000)
> should work, as well as true open-collector outputs.
or a Korg S-Trig style 5V..? (that last sentence went right over my head
today)
> > 3) had to look - who is "dork" in the /pix directory..?
> Err... that would be ME, circa 1978.
that's nothing, i was only ten then, however at least i could blame my
parents for any fashion mistakes back then :)
cheers
paul b