Well, I've already built my cabinets with flat rails. They are 12U wide or
6 2U Motm's. The way I worked mine is like this. The whole setup sits on
the floor next to my controller. The bottom cabinet is about 19" high and
houses 2 900 power supplies, a +-5v power one, my Kenton Pro-4, a Samson
PL1602 mixer, patchbay and a Furman power strip. The top 9" is set back at
a 12 degree angle to help visibility. Next is a 1 high row of six modules
also set back at twelve degrees. On top of that is a 2 row cabinet with no
setback and a filler strip of wood between the two rows of modules. One
top of that will be another identical 2 row cabinet . The cabinet is
built, I just need to do the staining and finishing on it and mount the
flat rails. By the weekend I should start mounting modules I have
completed in the top cabinet. The bottom three rows are fairly well
accessible from a sitting position and house the frequently used
modules. The top two rows will house less frequently used modules and
modules used with guitar input.
Dave
At 04:46 PM 9/26/00 -0400, you wrote:
>How's anyone planning to do cabinets for their MOTM once the rails come out?
>If I remember correctly the rails are 6 spaces wide, so for me, I was
>thinking of doing two row, 6 space cabinets..