> Paul, maybe upon releasing the rails in Sept, you could release a 1u
> panel with power input connector, switch, and fuse holder to wire remotely
to
> the larger PS mounted inside the cabinet?? Maybe a mult or two thrown in
for
> good measure? Or a power LED, or a Synth-Tech logo screened on?
I can't offer more than the MOTM-900 due to safety issues with AC power.
Feel free to
electrocute yourself :)
> And a question.. at the height of Moog's modular sales, how many
> different modules were in their catalog?
Not many! Not counting little crappy utility panels like mults:
914 fixed filter
904A LPF
904B HPF
902 VCA
911 EG
993 Trigger panel (this is a strech)
911A dual trigger delay
921A/B VCOs (maybe the 921 by itself counts, as it was used as the LFO
sometimes)
903A Noise
960 Sequencer
961 Interface (comparators/level shifter)
962 Sequential switch
and a power supply in the bottom of the cabinet.
That's about it! If you get real generous, there were maybe 2 or 3 more
after 1975 (this is the list from then).
So, all those giant "Wall of Moog" shots from the 70's are multiple copies
of these 12 modules :)
Paul S.