Archive of the former Yahoo!Groups mailing list: MOTM

previous by date index next by date
  topic list next in topic

Subject: Re: [motm] Welcome new members!

From: ivancu@...
Date: 2000-08-07

In a message dated 8/6/00 9:06:00 PM, revtor@... writes:

<< Paul, maybe upon releasing the rails in Sept, you could release a 1u
panel with power input connector, switch, and fuse holder to wire remotely to
the larger PS mounted inside the cabinet?? >>

My plan is to put my input connector, and fuse holder on the rear of my case.
No switch since I'll be switching from a larger power-distribution setup.

I was contemplating having two LED power indicators to show that both PSU
rails are working, and having them mounted on the side rack trim panels that
will be coming out. Will be a bit tricky to come through a screw hole but I
might actually mount the LED in the rack rail screw holes and have them shine
through holes in the trim panel. Have to wait for those panels to see if my
idea will work. I don't believe in wasting any panel space for PSU stuff
when I can have a synth module in there!