my 2 vco's act as you describe concerning amplitude decrease in
soft mode,but the strange thing is that when i start detune them i hear kind
of in/out of sync but the vco's are acting as a single vco,
i meen ther freq is the same even when they are detune .
exemple:
1 vco FINE =5 COARSE=5
2 vco FINE=5 COARSE=3.5
the result is the same freq on each vco output.
the same results hapen when playing with the FINE pots.
but i must say that it is a great vco with a very wide timbre spectrum,and
it sound in many cases like the Mini Moog,so i gees we wont die if the soft
is left as is.
thanx
Gur Milstein
At 08:57 AM 5/25/99 -0500, you wrote:
>From: "Paul Schreiber" <synth1@...>
>Again, set BOTH VCOs to soft, and patch SYNC I/O together. Tune the VCOs
>∗close∗ to each other. As
>you slowly detune one (use the FINE pot) you sould hear the VCOs go in and
>out of sync.