Funny you should mention this, I've spent several hours over the past week
trying to make some full panel size decals to cover my old Serge panels which
house my diy stuff (I'm trying to bond a legended transparency to some steel
gray card stock -- no luck as yet, air bubbles and the like, much more
difficult than I thought it would be). I should point out that I also have a
few Serge decals (VCFQ, DSG, Universal Audio Processor) which I can't imagine
being able to use, unless STS starts selling individual module kits again,
which I assume is highly unlikely. Maybe I could just use some CEM ICs and
slap the decals on the front.
Let me know what you want to do Dave.
JB
In a message dated 7/3/2000 6:20:28 PM,
davevosh@... writes:
>do you have a panel/rack with some blank space ( i
>guess that means pre-sts ) ? while rooting around in some old papers, i
>came
>across a schematic of the old serge peak and trough module that serge had
>sent me years ago in answer to a question about it. i`d gladly share a
>copy
>of the schematic with anyone who wants one. plus, he found a faceplate
>legend
>( if you know old serge stuff, the graphics were printed on ( i guess )
>contact paper to be applied to the metal panels in your chosen layout ).
>i
>still have this, too, so if you have a dual space in your panel, please
>contact me and i`ll send you the faceplate legend and a copy of the
>schematic. to anyone else interested in the schamatic on a d.i.y. basis,
>send
>me a s.a.s.e. and i`ll be glad to send you a copy. just let me know......