> > From: "mark scetta" <n0nspaz@...>
> > can i use the motm 110
> > VCA/RM to boost a low input signal so that the other modules are
getting
> > enough signal?
> From: "Dave Bradley" <daveb@...>
> I've done this. It helps a little, but the gain is not nearly as high as
a
> preamp.
> Good luck, and welcome to MOTM!
Certainly another trick that helps (and does not tie up your VCA) is to run
your synth into a mixer and use the headphone output to feed the audio into
your MOTM. Many headphone amplifiers are capable of 10 V p-p.
Larry Hendry
(also a JP-6 owner and lover)