Sure, 30-40 seconds easy!
Paul S.
----- Original Message -----
From: "Nathan Alan Hunsicker" <nate@...>
To: <motm@egroups.com>
Sent: Tuesday, June 20, 2000 5:35 PM
Subject: Re: [motm] lag processor question...
> and if remember correctly, i don't think the 820 lag has a lag time as
> high as 30 seconds. I think it was around 5 sec or shorter. -Nate
>
> jwbarlow@... wrote:
>
> > Damn! This patch won't work in the way I described since the 820
> > appears to
> > have no HOLD input (a gate input which holds the output constant
> > regardless
> > of the input). You'd have to have another S/H in front of the VC LAG
> > input in
> > order to keep the input from changing (and the output slowly following
> > that
> > input).
> >
> > Now it's getting expensive!
> > JB
> >
> > In a message dated 6/20/2000 1:27:38 PM, jwbarlow@... writes:
> >
> > >Now another idea for the 820 LAG PROCESSOR module:
> > >1) Take a CV source to the input of the 820 (e.g., noise).
> > >2) Take the 820 output to the input of the 100 (or 101) S/H.
> > >3) Take the 100 output to a CV input (say a 1v/oct of an oscillator).
> >
> > >4) Set the lag time to be rather long (like say a 5 octave sweep in
> > thirty
> > >
> > >seconds).
> > >5) Set the S/H level all the way up.
> > >
> > >This great patch (which I learned from the old Serge manual) keeps
> > step
> > >size
> > >small but allows for a full 10V peak to peak swing for the total
> > voltage
> > >
> > >output over time. This means that (in the patch example given above)
> > any
> > >two
> > >adjacent notes must be close together, but over time a full ten
> > octaves
> > >would
> > >be covered.
> > -----------------------------------------------------------------------
> >
> > -----------------------------------------------------------------------
> >
>
> ------------------------------------------------------------------------
> Get 6 months of FREE∗ MSN Internet access!
> http://click.egroups.com/1/5725/5/_/529958/_/961540368/
> ------------------------------------------------------------------------
>
>