I am getting ready to send my panels here locally and do MOTM DarkStars. If
anyone is interested, please let me know. You or Paul will have to send me
MOTM 2U blank panels for screen printing as I don't have any extras.
Cheers!
Todd
> -----Original Message-----
> From: jwbarlow@... [mailto:jwbarlow@...]
> Sent: Monday, June 19, 2000 9:31 PM
> To: motm@egroups.com
> Subject: Re: [motm] My MOTM DarkStar - (was Blacet-MOTM adaptor)
>
>
> Hey Moe! I think your panel looks great! I'd like to hear more
> about how this
> process is going. Will this "service" be available to other MOTM listers?
> Roughly how much will this be costing you per panel?
>
> As for John Blacet's idea of the "panel in a panel," at first I
> though it was
> kind of neat, but not the way I'd go. Then I realized that it
> would still be
> a good idea.
>
> Suppose one was to get a Blacet module which doesn't have (nor
> will likely
> ever have) a close MOTM cousin like the Time Machine VC BBD
> module. It seems
> to me that both a Blacet kit and a MOTM kit take about the same amount of
> time to assemble, but if there are no MOTM size front panels
> available for
> this module, one needs to diy one of these -- which would take a
> long time.
> So as a short term solution to this problem, the Blacet/MOTM
> adapters would
> be great -- I'd probably get a couple of them for the temporary solution.
> MOTM-Blacet Time Machine, hmmm......
>
> JB
>
>
>
> In a message dated 6/19/2000 8:05:46 AM, daveb@... writes:
>
> >I thought the purists on the list would enjoy a quick pic of my MOTM
> >DarkStar. Over the weekend I received the first batch of panels back from
> >my
> >silkscreener. The print quality is quite alot sharper than my crappy
> >digicamera shows. In fact, it looks just like a real MOTM module, except
> >for
> >the two screw heads visible to hold the bracket (Paul, you should offer
> >blank panels WITH studs!!!)
> >
> >Dave Bradley
> >Principal Software Engineer
> >Engineering Animation, Inc.
> >daveb@...
> >
> >> -----Original Message-----
> >> From: John E Blacet [mailto:blacet@...]
> >> Sent: Thursday, June 15, 2000 9:36 AM
> >> To: motm@egroups.com
> >> Subject: [motm] Blacet-MOTM adaptor
> >>
> >>
> >> Hello MOTMites! ;)
> >>
> >> Some folks were interested in something like this:
> >>
> >> http://www.blacet.com/BlacetMOTMadap.gif
> >>
> >> This would allow you to place a Blacet module in the cutout and add up
> >> to 8 1/4" jacks on the bottom. There is a white SS over the jacks so
> >you
> >> can presstype or mark the jack functions. They would look pretty much
> >> like a MOTM panel. I need to see some finish samples at the
> shop to make
> >> sure.
>
> ------------------------------------------------------------------------
> Missing old school friends? Find them here:
> http://click.egroups.com/1/5534/5/_/529958/_/961464663/
> ------------------------------------------------------------------------
>
>
>