YES!
Use a home-made "special interface cable". Put a 1/8" plug on one end, and
on the other end get 2ea 1K resistors
(any value from 1K to 4.7K will work, as long as they are the same).
Put resistor #1 in series with the inner conductor and the tip of the 1/4"
plug. Put resistor #2 from
the tip to ground.
This makes a simple 2:1 divider. And it all fits inside the plug casing.
Paul S.
Proud owner of a 184. yes, it IS a JP-4 CPU board in there!
----- Original Message -----
From: Charles Stella <cstella@...>
To: <synth1@...>
Sent: Wednesday, May 31, 2000 6:41 PM
Subject: Roland 180
> Paul,
>
> I got the Roland 180 keyboard today. The gate and trigger's
> output is +15v. Do I have have to modify this for 800 use? The 800
> manual specifies 0 to +13V. Thanks, Charles.
>