Hi Guys!
I need to ask if anyone out there can assist me with designing panel
graphics with the templates you have created in Corel Draw. I am planning to
build a small series of CEM modules to add to my MOTM rack. I will of course
be using the MOTM blank PCB and a 2-space panel for all of the modules. I
will be able to provide you with an panel mock up similar to a standard MOTM
module with all of the switches and knobs/jacks labeled. I think that the
stick on panel label is the most cost effective way to go and from the
pictures I've seen on Ken's sight and from Larry I have no complaints about
the end result. What type of finish do you guys put over the label in the
end? I will pay you for your time and help if you can give a brother a
break.
I am planning the following modules, with most of the filters ending up very
smiliar in overall function to an MOTM module with a much more jimmy-rigged
insides I assur you! Hah:
1. CEM3320 Low Pass (Sequential Pro-1 VCF) with 3 inputs with attenuators,
FM 1 and FM 2 similar to the 420 or 440, VC Resonance, and I'm not sure
exactly about the v/oct feature. I need to look more deeply at the MOTM
schematic.
2. CEM3310 VC ADSR with CV inputs/attenuators on A, D, S & R controls. Will
have gate and trigger inputs with a positive going output. Here's the VC
envelope generator we all talked about wanting but you have to build it
yourself from scratch (more like a grown up version of Lincoln Logs to me
anyways)
3. CEM3328 VCF Low Pass similar to above, but I figure you can never have
too many filters right. C'mon I make dance and techno music!
4. CEM3340 VCO for this one, I know it's not that smart, but I just have to
have one since my favorite fully fabricated synths all use them (SH-101,
MC-202 and MKS-80) All on the standard features of the classic CEM VCO
Thats it and I plan to work on one at a time with the VC ADSR being first.
Please let me know if you are interested in co-designing any of these
modules in conjunction with me or a small group of us off list. I for sure
plan to take advantage of Paul's ample stock of classic CEM while he has it
and no later because it will be gone someday. Each module shoul be fairly
easy to build on Pauls blank PCB and the end result will fit right into the
scheme of the MOTM rack.
If anyone out there is interested in providing me(We?) with labels please
let me know. I will of course need a panel drilling test and a final quality
lable for each module built. Thanks for your help or if you've read into
this to this point, thanks for listening
Thomas White
DJTW
________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at
http://www.hotmail.com