On Wed, 17 May 2000
jwbarlow@... wrote:
> And I bet Crow could whip a 1U module (tap tempo) pretty quickly. Then one
> could plug the output into the sync in of the 320 for example. Not a bad idea
> for a module (though of somewhat limited interest amongst MOTM buyers, and
> few people would want more than one). Possibly it could have a mic input and
> a footswitch input.
Tap-tempo acquisition is not difficult to do. Some years ago I made a
similar device that used 4 taps to set a rate. There are several "small,
but useful" PIC things I'd like to cram into a module. MIDI<>sync, a
gate-to-trigger thing (to do cute stuff like generate a trigger on the
rising, falling or both edges of a gate), this tap-tempo thing and a
digital noise generator that Does Not Suck(tm).
Crow
/∗∗/