Archive of the former Yahoo!Groups mailing list: MOTM

previous by date index next by date
previous in topic topic list  

Subject: Re: motm100 tech ?

From: mark scetta <n0nspaz@...>
Date: 2000-05-22


i have done this (used a 0.1uF ceramic disc) to no avail. i also have a 1K
resistor in series with the output conductor, at the jack.


At 07:03 AM 5/22/00 +0000, you wrote:

>The MOTM-100 has a known...errr....."issue" that when the S&H is in the
>sample state, whatever
>is at the input is passed to the output. This occurs for 2ms.
>There was a published fix last year: solder a 0.1uf cap (any old cap will
>work) directly across
>the output jack terminals (one end on the ground, the other on the conductor
>Paul S.