The MOTM-100 has a known...errr....."issue" that when the S&H is in the
sample state, whatever
is at the input is passed to the output. This occurs for 2ms.
There was a published fix last year: solder a 0.1uf cap (any old cap will
work) directly across
the output jack terminals (one end on the ground, the other on the conductor
lug).
Paul S.
----- Original Message -----
From: Tentochi <tentochi@...>
To: <motm@egroups.com>
Sent: Wednesday, May 17, 2000 12:42 PM
Subject: RE: [motm] motm100 tech ?
> Haven't put a scope on it yet, but I have it on the start of every new
pitch
> (output) also. Very irritating sometimes most of the time. I was
listening
> to it critically with a friend the other evening and it was really
> prominant. I will be interested in what Paul has to say on his return.
>
> --Shemp
>
> > i still get a glitch sound every time my S&H outputs, in both track and
> > hold modes (much bigger glitch in track mode). try it: with
> > nothing plugged
> > into the MOTM-100, listen to the output in both modes.
>
>
> ------------------------------------------------------------------------
> Make new friends, find the old at Classmates.com:
> http://click.egroups.com/1/4052/5/_/529958/_/958599675/
> ------------------------------------------------------------------------
>
>