In a message dated 5/17/2000 12:16:08 PM, Moe writes:
>OK, let's take a stab at this. You'd need a digital counter to time the
>taps. That would be converted into a control voltage, by a ROM table/DAC
>or
>some other means. The LFO receiving the control voltage would have to be
>precision tuned to a known starting frequency, and could have no FM going
>on
>other than the tap CV input.
And I bet Crow could whip a 1U module (tap tempo) pretty quickly. Then one
could plug the output into the sync in of the 320 for example. Not a bad idea
for a module (though of somewhat limited interest amongst MOTM buyers, and
few people would want more than one). Possibly it could have a mic input and
a footswitch input.
JB