True, true. That's not a bad idea, really--you can pin the wires down
between jacks while soldering, totally out of the way...
Thanks for the tip!
David.
> -----Original Message-----
> From: velure [mailto:velure@...]
> Sent: Tuesday, May 09, 2000 11:08 AM
> To: motm@egroups.com
> Subject: Re: [motm] Troubleshooting a short
>
>
> > And considering the iron proximity we have to work with sometimes when
> wiring the >front panel, it's fairly easy to slip and melt a bit of
> insulation.
>
> that's why i jump to the end of the instuctions and wire up the
> front panel
> jacks and knobs before i assemble the unit. i guess after you build a few
> panels, you'll figure out what works best for you.
>
> -steve
>
>
> ------------------------------------------------------------------------
> Buy and sell used, rare and vintage gear at the Web's best
> music gear auction. Register to enter the weekly gear giveaway!
> http://click.egroups.com/1/3730/5/_/529958/_/957892529/
> ------------------------------------------------------------------------
>
>