In a message dated 5/11/99 6:35:21 PM,
jlarryh@... writes:
>I am interested. I like the idea of a good flanger or phaser for MOTM.
> I
>think some effetcs could be cool. But, stay away from the ones that are
>easily done externally and/or digitally like reverb / delays.
I was thinking it would be useful to switch between different inputs and
different control sources of a VC Delay (preferably digital for infinite
repeat possibilities) with a MOTM 700 VC Router. You could then use, for a
simple example, a flanger for one signal and a slap echo for another with
the same module!!! But VC delay would seem to have many other advantages
beyond this. I do mostly agree that other digital reverb and delay units are
much better suited for what they do.
>And, NO spring reverb. These things have terrible frequency response and
>I
>don't think one could be made to sound good (up to MOTM specs). If you
>want a spring reverb, go build the PAiA. I did, and it sounds, well, like
>a spring reverb. This is one area where multi-effect or dedicated reverb
>effect boxes HAVE made an improvement in my opinion.
Here's a patch (which every 2600 user figures out rather quickly) which, if
you don't already use it, may make your springs seem a bit more useful.
1) VCO (or VCOs) to the reverb input (this may require the use of the soon to
be available MOTM Synth preamp).
2) Reverb to VCA.
3) ADSR to VCA VC in.
4) VCA out to mixer.
The reverb acts as LPF. Try varying the ADSR times for different effects.
Hope you like this.
JB