> From: Fred Becker [mailto:mach25@...]
> Sent: Wednesday, April 12, 2000 7:08 PM
> To: motm@egroups.com
> Subject: [motm] Two-Space PS
>
>
> Given the requirement to fit in an SKB case, the PSU can't be
> rotated. Yet
> the connector board could be removed from the front panel and mounted on
> the side of the enclosure. This would get it down to a two-space
> module. It assumes the enclosure were not too wide. There is room to
> place the switch to the side of the PSU still. The outlet would
> have to be
> on the back of the enclosure this way, since it would no longer have room
> on the front panel. I prefer it there anyway. I would prefer turning on
> the MOTM from the front and having the power cord coming out the back.
As you said, given the requirement to fit in a SKB pop-up mixer case, the
PSU can't be rotated. But also, the cord coming out the back won't work for
the SKB pop-up mixer case because there's no outlet for the cord when the
case is collapsed (which is how I use mine). No big deal for me, but it
would be to future builders in that case.
David.