RE drilling out a 940 - you can replace the 1/8" and left column of bananas
with 1/4" jacks, but note that the right column of banana ground plugs is
spaced closer than normal to accomodate dual banana plugs.
If you just want real mults, buy one or two 1U blank panels from Paul, get
some Switchcraft 112A jacks from Mouser or DigiKey, and make your own. It's
simple! And, you'd get a couple of spaces back to put another real module.
Dave Bradley
Principal Software Engineer
Engineering Animation, Inc.
daveb@... > I'm wondering about this too. I may only get one of these. I was only
> getting it for the mults at the bottom. I wonder if it would be
> possible to drill out the 1/8 and banana holes for 1/4 jacks.
> All the other gear I will interface with is 1/4. I even built
> my ASM-1 with the Chris List faceplate to use 1/4. Though after
> seeing what an ASM-1 went for on eBay recently, I may use it
> to fund more MOTM purchases :-)
>
> Thomas
>