previous by date | index | next by date |
previous in topic | topic list |
> -----Original Message-----
> From: Nathan Hunsicker [mailto:nate@...]
> Sent: Tuesday, April 04, 2000 1:24 PM
> To: motm@egroups.com
> Subject: [motm] Breakout Panel
>
>
> Hi everyone, I was looking into building a breakout panel for my Encore
> Expressionist. (8 cv's 8 gates, 2 MIDI's) and I was wondering should I be
> using coax or twisted wire to connect the jacks for the Encore
> to the back
> of the panel? The length will be about 3 ft for each cable. I was just
> thinking of buying 8 six foot patch cables and cutting them in half ($$$)
> Should I be taking a different approach? Let me know -Nate
>
> PS: I would be doing ther same thing with the MIDI jacks, a six foor MIDI
> cable cut in half and soldered to the front panel jacks.
>
>
>
> >PS. I just finished building my Kenton Pro-4 1u breakout panel
> for my MOTM.
> >
> >It includes 21 1/4" jacks for all of the ones on the back of the
> Kenton and
> >
> >I had room left over for 4 sets of multiples like the ones on the 940. I
> >
> >took extra time with labeling and custom legending. I hope to
> post a picture
> >
> >online soon of my system. 2 of my four remaining modules will be
> here by the
> >
> >end of the week and I will only have a 101 and 300 left to
> complete my basic
> >
> >road modular. Yeah mon!!
>
>
>
> ------------------------------------------------------------------------
> Get a NextCard Visa, in 30 seconds!
> 1. Fill in the brief application
> 2. Receive approval decision within 30 seconds
> 3. Get rates as low as 2.9% Intro or 9.9% Fixed APR
> Apply NOW!
> http://click.egroups.com/1/2646/3/_/529958/_/954872694/
> ------------------------------------------------------------------------
>
>