Hey all!
I believe the sweep knob controls the sweep range of both 410 LFO's. If you
turn these off and insert an external LFO from 320 or other source you will
be limited to one sweep instead of two separate sweeps with a third sweep
20% behind. You will for sure be able to re-trigger if you have a 320 or
Kenton LFO with midi sync. Still only the one new waveshape for all 3
bandpass filters, am I correct? Thanks for listening guys.
Thomas White
PS. I just finished building my Kenton Pro-4 1u breakout panel for my MOTM.
It includes 21 1/4" jacks for all of the ones on the back of the Kenton and
I had room left over for 4 sets of multiples like the ones on the 940. I
took extra time with labeling and custom legending. I hope to post a picture
online soon of my system. 2 of my four remaining modules will be here by the
end of the week and I will only have a 101 and 300 left to complete my basic
road modular. Yeah mon!!!
>From: "Dave Bradley" <daveb@...>
>Reply-To: motm@onelist.com
>To: motm@onelist.com
>Subject: [motm] Re: 410 Sync..
>Date: Mon, 03 Apr 2000 01:44:38 -0000
>
>--- In motm@onelist.com, revtor@a... wrote:
> > All,
> > ive only got a 410. So I've explored it pretty thoroughly...
> > I wish for a LFO reset input from a trig or gate.. Or being able
>to override
> > the internal LFO would be nice. Could any of these things be
>hacked into the
> > circut??
>
>No need to hack! Disable the internal LFO by turning the Depth knob
>to 0, then plug an external LFO, EG or other control voltage into the
>Sweep jack.
>
>Dave Bradley
>
______________________________________________________
Get Your Private, Free Email at
http://www.hotmail.com