Dave Bradley wrote:
From: "Dave Bradley" <daveb@...>This is exactly what the module was supposed to do. Not surprising,since
Paul proposed it after an identical earlier discussion about octave
switching VCOs <g>!Dave Bradley
Principal Software Engineer
Engineering Animation, Inc.
daveb@...>
>
> From: Nathan Hunsicker <nate@...>
>
> Back to Paul's Idea, how about a module that could produce 4different
> adjustable fixed cv's? As long as the voltages are adjustableyou
> could run
> the output into the fm2 jack on the 300 VCO. Setting # 1 couldbe 0V to
> allow the VCO to operate at its normal frequency, settings 2.3and 4 could
> be set by ear to different intervals above the base frequencyand then
> accessed at the touch of a button. This module would have tobe
> ultra-stable in order to keep from drifting and what's the useof an
> ultra-stable VCO if your cv source is going to drift. -Nate
>
>