Archive of the former Yahoo!Groups mailing list: MOTM

previous by date index next by date
previous in topic topic list  

Subject: RE: [motm] duh - remind me about another VCA?

From: "David Bivins" <dbivins@...>
Date: 2000-03-14

Thanks everyone for the info! I'm sure Paul will chime in with how far down
it is in his pile of upcoming modules... ;)

> -----Original Message-----
> From: J. Larry Hendry [mailto:jlarryh@...]
> Sent: Monday, March 13, 2000 5:46 PM
> To: motm@onelist.com
> Subject: Re: [motm] duh - remind me about another VCA?
>
>
> From: "J. Larry Hendry" <jlarryh@...>
>
> This is the information I last recall reported about the upcoming Ultra
> VCA. Much of this was cut and pasted from the actual announcement to the
> MOTM list from Paul. I would apologize for the plagiarism. However, I
> wouldn't mean it. <snicker>
> Larry H
>
> Ultra Dual VCA / panner - with lin/log inputs (separate!),
> panning, cross-fading, and mixing. Simulation shows
> that it's about a factor of 8 better that the '110 VCA,
> which ain't no slouch. Yes, it has LEDs! One feature is
> the gain linearity is 20mv max over a 10V range or 0.2%.
> Most VCAs are about 3-5% linearity. This makes for precise
> left/right panning and sound localization. Plus, I dare you to
> find a dual VCA module with better specs. No CA3080s here!
> All discrete, using matched low-noise cascaded stages. Yet,
> only 2 trims (for DC offset). Did I mention 2 different types of
> overdrive? Difficulty: It is a 10/10 kit.
> Be prepared: it's expensive. Kit will be in the range $189-$209.
>
> Last reported ship date: "on the drawing board"
>
>
>
> ------------------------------------------------------------------------
> MAXIMIZE YOUR CARD, MINIMIZE YOUR RATE!
> Get a NextCard Visa, in 30 seconds! Get rates as low as
> 0.0% Intro or 9.9% Fixed APR and no hidden fees.
> Apply NOW!
> http://click.egroups.com/1/2122/2/_/529958/_/952990811/
> ------------------------------------------------------------------------
>
>