I don't think it would do what you want - make the splitter cable (or use a
mult).
The EG wants a signal that goes high to turn the gate on and goes low to
turn it off. An audio signal would bounce all over the place. I don't know
what the fastest rate the EG can accept a Gate, but it certainly doesn't
want audio, but it could be interesting to try ;)
I believe the EG wants 0V and +5V gate signals. The headphone out is likely
to be +/- 6V AC.
Eric
> -----Original Message-----
> From: velure [mailto:velure@...]
> Sent: Wednesday, February 09, 2000 4:43 PM
> To: motm@onelist.com
> Subject: [motm] patching
>
>
> From: "velure" <velure@...>
>
> here's a question for the group. i have not tried this yet,
> but really want
> feed the headphoneAUDIO output from my 303 into the GATE
> INPUT of my EG 800.
> i am using the cv/gate out of the 303 to sequence the 101. i
> guess i could
> create a splitter cable, but, I AM LAZY.
>
> what would happen if i did this? would it retrigger the EG?
>
> silly steve
>
>
> --------------------------- ONElist Sponsor
> ----------------------------
>
> $10 Savings on Pet Valentine Gifts.
> Looking for that pet-perfect Valentine\u0012s Day gift?
> Click here for $10 off purchases of $25 or more.
> <a href=" http://clickme.onelist.com/ad/NewPetopia2 ">Click Here</a>
>
> --------------------------------------------------------------
> ----------
>
>