Thanks much for the info! Depending on how long it takes for MOTM cabinet
rails to hit the market, I am going to give this some serious thought.
-----Original Message-----
From:
JWBarlow@... [mailto:
JWBarlow@...]
Sent:Wednesday, February 02, 2000 10:10 PM
To:
motm@onelist.comSubject:RE: [motm] Rails & Cabinets
Yes, the MOTM rails are great -- very sturdy. The only
problem I see would be
getting the "ears" in the vice at the exact distance to bend
for a perfect
width rail (especially if one were to do this repeatedly for
building several
cabinets at once, but you could set up a jig -- a stop on
your vice -- to
facilitate this). A similar idea would be to just cut the
ears off, but they
seem perfect for mounting to the sides considering they are
bent in the wrong
direction.