Hi,
First, make sure you mount the 990 board securely to your rack/cabinet/case.
If your case is wood and thick enough, you might be able to use wood screws
but otherwise use nuts and bolts and lock washers etc. Make sure to use 1/2"
or longer standoffs/spacers (they are little plastic or metal tubes that
look like straight macaroni), don't just bolt/screw the 990 flat against
your rack surface!
Then, probably the easiest way to connect the 990 adapter board to the 950
board is to use a MOTM 6 pin power cable. Cut one in half (or to whatever
length allows a comfortable reach) and strip a 1/4" or so of the insulation
off. Attach the stripped ends to the 990's screw terminals and then just
plug the other end into your 950.
If you can look at Muff's forum I have some pictures in this thread of a DIY
power supply I build using a MOTM-990 as the main distro board. Not the same
thing you are doing but maybe it will give you some ideas! :-)
http://www.muffwiggler.com/forum/viewtopic.php?t=2628Best of luck!
John L Rice
> -----Original Message-----
> From: motm@yahoogroups.com [mailto:motm@yahoogroups.com] On Behalf Of
> Ancient Eyeball Recipe
> Sent: Saturday, April 10, 2010 8:33 AM
> To: MOTM List
> Subject: [motm] installing a 990 adapter board
>
> I'm really pretty clueless about this end of things, but in case this
> question isn't too silly...
>
> I received my 990, and I don't have a clue as to how to connect it to
> the 950. Obviously I'll need a cable of some sort, but then what do
> people generally do - just lay it down horizontally or something?
>
> I really have no idea - I thought it would be self explanatory and
> perhaps come with the necessary connectors, but I guess not.
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>