Archive of the former Yahoo!Groups mailing list: MOTM

 

 

 

also i'm suspicious that giving the 101 CVs of 0-3.4v is resulting in
small pitch changes only. that should be a 3.4 octave range.

does the 101 CV input work reliably with other CV sources?

>Have you tried

patching a large signal into the S&H input? Patch the

>Triangle output

of a MOTM-300. Run the 300 at the lowest frequency. If

>you're not getting

any negative output from the 101, something is wrong

>with the sample and

hold section. If this test works, there may be a

>problem with the Pink

noise on the 101. Try adjusting the noise gain

>trimpot,

TP1.

>
>Richard Brewster
>

href="http://pugix.com">http://pugix. com

>
>Miguel Mendoza

wrote:

>>
>>
>> Hello, I'm wondering if my MOTM 101

is working fine. All the sections

>> work but I have always been

thinking that the SH output has a very

>> smooth, subtle response. Even

I only coud hear small pitch changes on

>> a VCO if I put the SH level

at 10.

>>
>> Today I connected it to my 730 DIV MOD input and

it didn't change any

>> value. Other signals like LFOs were modulating

de /N output but the SH

>> does nothing.
>>
>> I

checked the SH output with a digital voltimeter and it was

>> changing

values at every clock pulse as expected but all of them were

>>

positive from 0 to 3.4 v. aprox. I was checking it for a while and I

>>

couldn't read any higher than 3.4 v. and all of them were

>> positive.

The level pot was at 10 all the time.

>>
>> So, anybody can

say if this is normal? Any tip?

>>
>> Thanks in

advance.

>>
>>

Miguel.

>>
>>
>>
>
>
>
>----------- --------- --------- -------
>
>Yahoo!

Groups Links

>
>
>