Archive of the former Yahoo!Groups mailing list: MOTM

Possibly the easiest way if there is enough slack on the MOTM-900 wires
would be to cut the 3 wires going from the supply to the distro board in
half, strip the ends prepare 3 new pieces of wire with stripped ends long
enough to reach your 960 and then use wire nuts to connect the ends
together. Not crimping or soldering required. Now, what the 'best' method is
I can't say! ;-)

Best of luck,
John L Rice

-----Original Message-----
From: motm@yahoogroups.com [mailto:motm@yahoogroups.com] On Behalf Of
patchdub1972
Sent: Thursday, June 11, 2009 7:38 PM
To: motm@yahoogroups.com
Subject: [motm] installing a 960?

hi folks.

whats the best way to go about installing a 960 to the 900?

thanks!!
-patch



------------------------------------

Yahoo! Groups Links