1. isn't the Cloud basically done? i saw it work at AHBA 2007, 1.5
years ago. seems sensible to start with that.
2. SEM VCF in traditional thru-hole solder-the-world format
3. FFB/EQ, ideally with some quirks, like selectable personalities or something
>After reading everyone's inputs for what is desired for a DIY/pc board only
>(or module, but all in old fashioned through-hole technology) I've decided
>to work on the SEM VCF with Voltage-Controlled Output Morphing.
>
>For all you solder jockeys out there, it will be as complicated as the
>MOTM-480 VCF. But with ∗more∗ parts. Yippee.
>
>In order to take advantage of all it can do, it will have 6 panel controls
>but 11 jacks. I plan to use a standard BR-1 bracket/MOTM pc board size
>∗unless∗ the layout goes south and won't fit. It will be ∗very∗ dense.
>
>There will be 2 audio inputs, voltage-controlled resonance and
>voltage-controlled output morphing (along with HP/BP/LP/Notch ∗fixed∗
>outputs). The MORPH sweeps between HP/BP/LP on a dedicated output.
>
>Even though it uses 'vintage' op amps, I just checked Digikey/Mouser and
>they have tons in stock. There are several LM13700 dual OTAs but again not
>an issue.
>
>So, one last 'poll':
>
>What would you rather see ∗first∗:
>
>a) some sort of FFB/parametric EQ boards?
>
>b) the SEM VCF boards?
>
>c) the Cloud Generator in all it's assembled SMT glory?
>
>Paul S.
>
>
>
>------------------------------------
>
>Yahoo! Groups Links
>
>
>