Now that's a hard one - seriously! I don't care, I'm in for all of them.
-Greg
-----Original Message-----
From:
motm@yahoogroups.com [mailto:
motm@yahoogroups.com] On Behalf Of Paul
Schreiber
Sent: Monday, February 16, 2009 7:30 PM
To: MOTM List
Subject: [motm] Results of the 'user poll'
After reading everyone's inputs for what is desired for a DIY/pc board only
(or module, but all in old fashioned through-hole technology) I've decided
to work on the SEM VCF with Voltage-Controlled Output Morphing.
For all you solder jockeys out there, it will be as complicated as the
MOTM-480 VCF. But with ∗more∗ parts. Yippee.
In order to take advantage of all it can do, it will have 6 panel controls
but 11 jacks. I plan to use a standard BR-1 bracket/MOTM pc board size
∗unless∗ the layout goes south and won't fit. It will be ∗very∗ dense.
There will be 2 audio inputs, voltage-controlled resonance and
voltage-controlled output morphing (along with HP/BP/LP/Notch ∗fixed∗
outputs). The MORPH sweeps between HP/BP/LP on a dedicated output.
Even though it uses 'vintage' op amps, I just checked Digikey/Mouser and
they have tons in stock. There are several LM13700 dual OTAs but again not
an issue.
So, one last 'poll':
What would you rather see ∗first∗:
a) some sort of FFB/parametric EQ boards?
b) the SEM VCF boards?
c) the Cloud Generator in all it's assembled SMT glory?
Paul S.
------------------------------------
Yahoo! Groups Links