Archive of the former Yahoo!Groups mailing list: MOTM

For Sale.

All these work perfectly and are in excellent condition, but need the
space in the studio for some other stuff I recently got. I prefer
Paypal. Will also do cash if you are dealing with me locally. (New
York)

Cyndustries Zerooscillator in .com format 910$

.com modules:

-Q 119 Sequencer 480$
-q 115 Reverb (with reverb tank) 110$
-2x Q 106 Oscillator 165$
-Q106 Oscillator + Q161 Oscillator mixer expansion 235 $
-q125 Signal Proccessor 60$
-q108 Amp 75$
-q109 EG 75$
-a107 State Variable Filter 100 $

-CGS Wave Multiplier (.com format) The original design was by Ken
Stone, and Larry Hendry took it from there. Dave Bradley assembled and
tested it. I think there was a very limited quantity to start with,
and I'm not sure that Dave assembled more than one, or maybe two. In
any case, this is gonna be rare. It has the standard MOTM male 4-pin
power connector which can convert easily with the dotcom power adapter
( I will include adaptor for free). Has manual and CV inputs for
"fold, offset, PWM, PW, "... manual controls for 'drive' and lag', and
also, inputs for square and triangle. It has a 'pulse' and 'fold'
output, and a grind-in and grind-out. will send picture of interested.
the panel looks perfect and fits perfectly with other .com modules.
Usual .com 2 space panel width. (same as an oscillator).looking for
370$ which is a little less than what I paid for it, but would listen
to any offers (more or less) for this.

MOTM 995 Power distribution pannel (accepts .com and powers up to 10
motm modules, or use as a regular distro board for both .com and motm
modules with power from either supply) 25$.


any combination of the above modules will ship inside the US for 10$.



THE FOLLOWING I WOULD PREFER TO SELL LOCALLY (New York) :

.com Cabinet with .com power supply, q-137 Power Interface and
distribution harness 420$ (all you need to get started)

.com Cabinet qwith q-103, no power supply but comes with cable so that
it can be powered from another cabinet and distrbution harness has
slight damage on the middle wood rail from screws, but nothing that
won't allow you to put modules in it. 250 $


Curetronics 6U height system (works great with .com,motm and other
large format systems or on its own)
with:
-power supply + nice wood cabinet and power distribution system.
-Quintuple LFO
-Quad CV LFO
-2 ASDR
-One Steiner-Parker Multimode Filter
-One Wave Crusher
-6 open single spaces.
-small bag of spare replacement parts

Curetronics is no longer making modules in this height, but the open
space is ideal for adding DIY modules, or you can get the 5U height
modules and extend the faceplate a bit to fit them.

I paid around 1400$ for this system, taking best offer. though Ideally
would like at least 1000$ for it and would prefer to sell it locally
so I don't have to figure out how to ship the cabinet.

Also willing to just sell all the modules at 75% of their new price if
no one wants to take the entire Curetronics system.