I'm trying to confirm which fuse to get for a 900 upgraded with a
HBB15-1.5A power supply.
The unit itself seems to suggest a 1 amp verion of the 239 would work
for 110VAC. The printed instructions, however, seem to say to use a
.5 (assuming I'm reading it right). Both of these seem low to this
admittedly non-electronics-geek, so I thought I'd ask here, since I
know some of you have done this upgrade.
Thanks!
JN
--- In motm@yahoogroups.com, "Paul Schreiber" <synth1@...> wrote:
>
> 215 = ceramic fuse body (not glass) used in high shock/vibe will
work but
> overkill
>
> 218 = 'normal' fuse for Europe, what I buy
>
> 239 = 'normal' fuse for USA, what I buy
>
> Paul S.
>
>
>
> ----- Original Message -----
> From: "Richard Brewster" <pugix@...>
> To: "MOTM List" <motm@yahoogroups.com>
> Sent: Saturday, July 05, 2008 12:08 PM
> Subject: [motm] Fuse part number form MOTM-900/950
>
>
> > Looking at Mouser for replacement 800ma/250V SLO-BLO 5mm x 20mm
fuse, I
> > see three choices (current catalog page 591): Series 215, 218, and
239.
> > Which is the correct part. And what's the difference, besides cost
> > ($1.23, $1.99, and $0.75 in single quantity, respectively)?
> >
> > I haven't blown a fuse. Just looking for similar parts.
> >
> > Thanks,
> >
> > Richard Brewster
> > http://www.pugix.com
> >
> >
> >
> > ------------------------------------
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
>