Sorry to hear about your health issues.
I had one crash so far. I had it set up in mono (single channel,
single voice) mode, MIDI channel 2, with MIDI thru from a Moog
Voyager. The unit locked up and showed "Q4 BAD" or something like that
in the display. I switched it off and on and it's been OK since. I've
since rewired it so that I have a direct MIDI out of my MOTU MIDI
Timepiece AV going into the 650 MIDI input, with it set to MIDI
channel 1.
On Dec 11, 2008, at 2:25 PM, Ti_ wrote:
>
> Has anyone else had any issues with channels 3&4 in particular?
> Mine are all sorts of funky when it comes to attempting a full
> 1/1/1/1 style patching. Here's a short basic description:
> > Channels 1&2 seem to work fine no matter what. The wierd stuff is
> between 3&4.
> They both work fine on any midi channel...but ONLY as long as they
> are both set to the same midi channel.
> If 3 is on a different channel than 4 it only produces about 2
> octaves untill the pitch hangs and won't go any higher
> and 4 acts the same way. All of the VG's are in solo monophonic
> mode. Both Arppegiators are Off.
> The firmware installed is 1.3<
> The specifics got even more bizarre as I dug deeper into the issue
> but that's the basis of it. I've always wanted to use the 650 to
> essentially be able to send out 4 separate melodies, harmonies, and
> or bass lines, but I can essentially only output 2 lines and
> occasionally I just use 3&4 for triggers since that's about all I
> can count on working as it does.
> ~Tim
>
> From: J.D. McEachin <jdm@...>
> To: motm@yahoogroups.com
> Sent: Thursday, December 11, 2008 2:39:05 PM
> Subject: Re: [motm] 650 OS Update?
>
> At 10:52 AM 12/11/2008 -0800, James Elliott wrote:
> > Any news?
>
> Sorry, health problems have severely limited my time & energy.
>
> > I am encountering a very frustrating issue with my new 650.
>
> Sorry to hear that. Which version of the firmware do you have?
>
> At 01:10 PM 12/11/2008 -0700, Scott Juskiw wrote:
> >
> >MOTM-650: love the hardware, hate the software.
>
> How so?
>
> JD
>
>
>
>
>
NOTICE: This electronic mail message and its contents, including any attachments hereto (collectively, "this e-mail"), is hereby designated as "confidential and proprietary." This e-mail�may be viewed and used only by the person to whom it has been sent and his/her employer�solely for the express purpose for which it has been disclosed and only in�accordance with any confidentiality or non-disclosure (or similar) agreement between TEAC Corporation or its affiliates and said employer, and may not be disclosed to any other person or entity. �
�
�