Hmmm, that's not quite what I had in mind, more something that would go into
the MOTM spacing scheme. I.E., 1U wide by 5U tall. (I know, picky
picky...) But the Raxxess may turn out to be the good investment after all.
--PBr
> -----Original Message-----
> From:Nathan Hunsicker [SMTP:nate@...]
> Sent:Sunday, January 23, 2000 12:24 PM
> To:motm@onelist.com
> Subject:Re: [motm] Multiples
>
> From: Nathan Hunsicker <nate@...>
>
> Raxxess make a 16 hole drilled rack panel (1U tall) with holes for 16
> 1/4" jacks, I have used this panel and made for sets of 4 linked jacks
> for exactly the purpose you stated. The panel costs about $7 and the
> jacks and coax cost be another $16. It can all be assembled in less than
> an hour.
>
> "Brousseau, Paul E (Paul)" wrote:
>
> > From: "Brousseau, Paul E (Paul)" <PaulBr@...>
> >
> > Hello again (and welcome Thomas!)... I'm wondering if it would take
> > much
> > effort to throw together a 1U multiple panel, similar to the 940 but
> > without
> > the jacks for other systems. Just 4 4-way multiples. Paul, you've
> > already
> > got blank 1U spacers, right? All that would be left would to drill
> > them
> > correctly and spot in a bunch of switchcrafts and solder them
> > together.
> > Something like this would be terribly useful to me... Unfortunately,
> > I
> > don't have a drill press, nor an arm steady enough to drill them
> > myself (to
> > satisfaction).
> >
> > Does anyone have the inclination to undertake the service of drilling
> > some
> > blanks?
>