Hi, you probably have 3 x ca3280 (Scott used to provide those with
the boards)but there's no cem 3320 in the neural agonizer if I'm not
missing something.
Enrico Dibennardo
--- In motm@yahoogroups. com, hearts + horses <Wes@...> wrote:
>
> Hi, I have a ton of parts for the tellun corp neural agonizer. I
have the panel made by bridechamber. both circuit boards from tellun
corp.I also have the CEM3320. 2 brackets for the circuit boards and
pretty much almost all the parts needed. I am missing a bunch of the
100k resistors. I must have used them for something else. I have all
the other resistors. I have all the capacitors, most of the
semiconductors. all of them except the vactrols. I only have 5 of
the spectrol 149 pots and only 5 of the switchcraft jacks. no dip
sockets. no alco knobs, dont have all the screws and spacers, no
wire, no coax cable, no solder, no heat shrink. I do have all the
other parts needed as far as I could tell by looking at the parts
list.
>
> I DO NOT have the reverb tanks.
>
> some pictures here:
> http://www.flickr. com/photos/ softestthing/ sets/72157609708 338787/
>
> I don't know how much all the parts cost or anything. I guess make
me an offer off list.
>
> thank you.
> wes
>