Um, that would be Richard Brewster ;->
I looked at inlets with line filtering, too. I am not sure what sorts
of application require such filtering. It seemed to me that it would
not add a lot of benefit to a MOTM system.
Richard Brewster
http://www.pugix.com
John L Rice wrote:
> Hi,
>
> Check out David Brewster's site here
> http://pugix.com/synth/portable-rack-cabinets/ He mentions one he used
> that is similar: " combination AC inlet, power switch and fuse, Schurter
> IEC320 AC I, (Mouser 693-4304.6090) for $9.00"
>
> Inspired by David's site I'm using similar cabinets and power supply setup.
> I decided to get 'fancy' and use a more expensive AC inlet that has line
> filtering, even though it may not be of any real value (I whole heartedly
> believe in over kill! ;-)
> http://www.alliedelec.com/Search/ProductDetail.aspx?SKU=6894156&MPN=864-03%2
> f003&R=6894156&SEARCH=6894156&DESC=864-03%2f003 It's $30 plus tax and
> shipping though!!!! ;-( Besides filtering it has voltage selection and
> since the PowerOne can accept 120 or 220 AC, I thought I would wire it up
> with an inlet that could be switched. (I've NEVER traveled to England or
> Japan etc and have no plans to do so but . . . obsessive compulsive behavior
> doesn't like to be ignored! ;-)
>
> If you look at Allied's main page for power inlets they show a 'Top seller'
> for $8.50 that looks like it should work too. And there is a mind boggling
> TON of different models to choose from!
> http://www.alliedelec.com/search/SearchResults.aspx?N=4294821653&SKU=689-415
> 6&sid=11C342467F33
>
> Best of luck!
>
> John l Rice
>
>
> -----Original Message-----
> From: motm@yahoogroups.com [mailto:motm@yahoogroups.com] On Behalf Of
> sduck409
> Sent: Friday, September 05, 2008 5:10 PM
> To: motm@yahoogroups.com
> Subject: [motm] Switch for 900?
>
> Does anyone know a mouser/digikey number for the switch that's used in
> the 900 power supply? I've got everything I need for the power supply
> in this new cabinet I'm building except for the switch - and as
> everything else in it is up to motm specs, I'd like the switch to be too.
>
> Thanks!
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>
>