| previous by date | index | next by date |
| previous in topic | topic list | next in topic |
The smallest PowerOne that ‘should’ work is onlyabout $50 (US$) as long as you need less than 400mA:
http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=179-2306-ND
Also, some very helpful related info here from Richard Brewster:
http://pugix.com/synth/portable-rack-cabinets/
Best of luck!
John L Rice
PS – PLEASE understand, fear and respect AC current beforeattempting DIY power projects! Death awaits just a tiny stupid mistake away. (I’vebeen REALLY lucky at least three times in my life . . . and I’m notgenerally stupid . . . unless it comes to credit cards . . .and especially women!;-)
From:motm@yahoogroups.com [mailto:motm@yahoogroups.com] On Behalf Of StephenDrake
Sent: Tuesday, August 19, 2008 7:06 PM
To: MOTM List
Subject: Re: [motm] Portable power
Or there's always the extremediy approach -
http://www.musicfromouterspace.com/analogsynth/WALLWARTSUPPLY/WALLWARTSUPPLY.php
This with one of Paul's distribution boards and you'd be in business.
Personally I'd rather be using Paul's 900 hardware than this however.
On Tue, Aug 19, 2008 at 12:19 PM, Matthew Hiscock <audio@...> wrote:
Perhaps this would do the trick?
Cheap, 240ma, +/-15v - I'd justhave to deal with the 5-pin DIN in some way....
On 19-Aug-08, at 12:59 PM, JonathanSnipes wrote:
What about the Dotcom QPS2:
could easily switch out the powerconnectors with the MTA 156 ...
-j
On Aug 19, 2008, at 9:49 AM, PaulSchreiber wrote:
a) I have never seen a +-15Vregulated wall wart. I have seen +-12V (they
use a 5-pin DIN, a la MIDI). But this will not work with MOTM.
b) your best bet is to get a 5U tall case, put a MOTM-900 in there, and
leave it. Then, when needed, remove modules from
the studio and place in there.
Paul S.
__________________________________________________
--
------------------------------------------------------------------
Stephen Drake
sduck409@...
makeme1witheverything@...