Do you have any more details on the MOTM-730 and it's functions? Perhaps a front panel
shot or mock up? I'd love to post that on my blog if that's okay with you :-)
--- In motm@yahoogroups.com, "Paul Schreiber" <synth1@...> wrote:
>
> a) I will have 4 of the 5 boards in the MOTM-730 VC Divider in later this
> week for testing. These are "prototypes but ready for production', meaning
> unless I screwed up I can use the design for production. The last board is
> the CPU board, it is a 4-layer board (hopefully not 6) and I will get these
> at the end of the month. The mechanical design of how all 5 boards stack
> up/interconnect was quite a pain. By the end of May the board set & front
> panel will be released for production, and around the 4th of July will be
> ready to ship. The cost will be $349.
>
> b) due to extensive non-MOTM work requirements starting tomorrow, very
> little will be shipped this month. I will be able to ship what I can April
> 22-26, I will try to catch up as much as possible. The month of May looks to
> be ∗much∗ better in this regard, and also May is set aside for the CG/CGX
> pcb layouts. The breadboarding has gone well for both of these, we are
> convinced there is no major issues so it's time to flip the switch.
>
> c) I will get MOTM-300 panels with the new paint April 21st.
>
> d) as time allows (again, not a whole lot in April) I will start kitting up
> the last 62 MOTM kits, starting with the 4xx VCFs. I need to pound on Newark
> for the rest of the log pots (they owe me 200) but I do have 300 of the 248J
> (metal shafts, plastic bushings).
>
> e) also due in this Wednesday are the revised MOTM-910 mult pc boards (I
> messed up the jack holes the first time, they worked but not 'perfectly')
> and I expect them to be good enough for production. I have 5 coming in, I
> will build up the 5 and ship them out ASAP as there are back orders for 9 I
> last checked.
>
> Paul S.
>