There is a drawing of the rack cabinet on my site.
http://modularsynthesis.com/cabinet/DJB_rack_cabinet.pdfIt's a slant cabinet and the outside depth is 9" at the top and 11"
at the bottom. The expansion cabinet that sits on top is 9" deep.
There is a 0.25" back and the modules are set in 0.5" from the front
so the internal depth is 8.25" at the top and 10.25" at the bottom.
The MOTM-900 power supply mounts in the rear so I have less depth in
the lower right 2U.
Below the MOTM rails is 2U of standard rack space. Below that is a 1U
blank panel with a master power switch. This part of the rack is
unusable because of the slant.
The rear is closed except for the bottom 2U so I can access the
standard rack gear.
Dave
--- In motm@yahoogroups.com, Michael Zacherl <egroups@...> wrote:
> Hi Dave, very nice setup!
>
> The 19" units on the left, what's their depth?
>
> Thanks, Michael.