Hi Jeff -
My son Will and I are building a synth in two 18U cabinets (we're
beginning work on them soon) side-by-side. We did a layout to see how
the modules would work out. You can see it here:
http://www.dragonflyalley.com/billAndWillMOTMSynth.htmThe red circles show the reach of 20" power cords. We have the 5V
modules in the right cabinet. All the ones in the left are 15V. So
we'll use two 1.5 Amp (I think this is right) power-ones for the right
cabinet (we got two kits from Paul - a 900 and a 950) and we'll put a
beefy 3A (I think) power one in the left cabinet for all the 15V units
on that side.
We're going to have the bottom row of modules tilted back 15 degrees -
the top rows straight up. Four rows seemed to high.
We decided to build the cabinet with metal rails. We ordered them
last week from a fellow on Ebay and they should be arriving any day now.
I'll put some diagrams up over the next couple weeks as we get further
along in the design.
Happy New Year!
Bill and Will