On 2007-08-11 20:52 -0000, lfosynth2000 wrote:
> Im starting to put toghether an order for some DIY Motm building parts
> and as I dont have a good knowledge of electronics Im wondering if you
> guys can help me out with some info regarding what type of resistors I
> need to use and if theres a special brand used in the motm modules.
Probably best get some 0.25 W 1% metal film. Last year, I got some
Koa Speer because Mouser still had some non-RoHS in stock
(660-MF1/4DLT52R1001F for the 1 k, 660-MF1/4DLT52R1002F for the 10 k,
660-MF1/4DLT52R1003F for the 100 k).
> Also if you have some tips for caps brands. Im probarly ordering
> most parts from mouser.
Wima, LCR, Panasonic make good caps. Xicon make polystyrene caps
that are cheap but have rather high temperature coefficient. AVX
make handy 100 nF axial multi-layer Z5U ceramic caps for
decoupling (Mouser 581-SA105E104M).
--
André Majorel <URL:
http://www.teaser.fr/~amajorel/>
Do not use this account for regular correspondence.
See the URL above for contact information.