Can't you fit a third switch in the space left over by removing the FM2 pot?
Richard Brewster
http://www.pugix.comPaul Schreiber wrote:
> I am about to start the pc layout of the MOTM-1300 Frac VCO.
>
> This is a "same but different" design, because of the SMT nature. Also, all of
> the features
> of the MOTM-300 will not fit on the 2-width panel.
>
> If you look at the MOTM-1190 VCA, that has:
>
> 8 jacks
> 6 pots
>
> and room in-between the pots for 2 SPDT toggles.
>
> So what I am thinking is as follows:
>
> Jacks:
>
> PWM 1V/Oct FM Sync
> Sine Tri Saw Pulse
>
> Pots (using 5):
>
> Coarse Fine
> Width PWM
> FM
>
> The 2 toggle switches are:
>
> Hard/Soft sync
> EXP/LIN FM
>
> So, what is "given up" over a MOTM-300 is AC/DC FM coupling and the second
> FM input jack/attenuator.
>
> Comments? Better speak up quick!
>
> Paul S.
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>