This is what it says:
"Connectors: 6 pin male circular DIN with metal hood.
Cable: 4 conductor, 24awg stranded.
Maximum Current: 1 amp"
Imho, that is insufficient for what the original poster is doing.
Nor are DIN connectors particularly road-worthy.
Also, using speakons with common electrical cable would cost less money.
On 4/11/07, John Mahoney put forth:
>At 10:36 PM 4/10/2007, earthtodylan2000 wrote:
> >...
> >The best way to connected the cabinets power-wise? 4 connector Neutrik?
>
>If you decide to do this, instead of using one supply per cabinet,
>you might take a look at what Synthesizers.com does. There are
>"Inter-Cabinet DC Power Cables"
>(http://www.synthesizers.com/q101.html) that use 4-pin connectors,
>wired as described at http://www.synthesizers.com/technical.html
>
>See also the Q103 DC Power Interface Module
>(http://www.synthesizers.com/q101.html).